Employer Intelligence Profile

Mobilier de bureau logiflex inc. LMIA employer profile

Sherbrooke, QC J1N 0H2

Mobilier de bureau logiflex inc. appears in the visible LMIA employer record set with 68 approved positions across 11 sponsoring role tracks in Quebec. The clearest role signals are Furniture and fixture assemblers and inspectors, Machinists and machining and tooling inspectors, Shippers and receivers, and the latest visible activity appears in January to March 2025.

Hiring foreign workers: Yes Active in 2025

Executive summary

Approved positions on record 68
Sponsoring job tracks 11
Provinces in scope 1
Latest visible activity January to March 2025

Visible streams: 2 | Core stream mix: Low Wage, High Wage

Confidence Promising hiring confidence
Pathway fit Emerging PR Pathway Fit
Role mix Furniture and fixture assemblers and inspectors, Machinists and machining and tooling inspectors, Shippers and receivers

Sponsoring roles

Sponsoring jobs with LMIA support

Mobilier de bureau logiflex inc. currently shows 11 sponsoring role tracks and 68 approved positions on record. The clearest role signals on this page are Furniture and fixture assemblers and inspectors, Machinists and machining and tooling inspectors, Shippers and receivers.

Furniture and fixture assemblers and inspectors This sponsoring role is shown with the legacy NOC 2016 code carried in the historical LMIA record. Older employer records can use 4-digit codes even when the newer Canadian classification now uses 5-digit NOCs. Legacy NOC 9532 TEER N/A Quebec Low Wage 17 positions $15 - $22/hr

As a furniture, fixture assembler, and inspector, you will work on furniture assembly, manufacturing, quality inspection, hand tools, and attention to detail while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Furniture Assembly Manufacturing Quality Inspection Hand Tools Attention to Detail Safety Compliance

Typical employer expectations

  • Apply role-specific judgment in furniture assembly
  • Keep manufacturing organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on quality inspection tasks
  • Maintain safe, dependable follow-through while supporting hand tools

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a machinist, machining, and tooling inspector, you will work on precision engineering, quality control, manufacturing, machine operation, and tooling inspection while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Precision Engineering Quality Control Manufacturing Machine Operation Tooling Inspection Blueprint Reading

Typical employer expectations

  • Apply role-specific judgment in precision engineering
  • Keep quality control organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on manufacturing tasks
  • Maintain safe, dependable follow-through while supporting machine operation

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a shipper and receiver, you will work on delivery; vehicle operation; records, reports, or documentation; warehousing and inventory; and driving and transport while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Delivery Vehicle Operation Documentation and Reporting Warehousing and Inventory Driving and Transport Material Handling

Typical employer expectations

  • Apply role-specific judgment in delivery
  • Keep vehicle operation organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on records, reports, or documentation tasks
  • Maintain safe, dependable follow-through while supporting warehousing and inventory

Employers also commonly look for

  • Education: Some employers may expect some secondary school preparation.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a furniture, fixture assembler, finisher, refinisher, and inspector, you will work on furniture assembly, manufacturing, quality inspection, finishing, and hand tools while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Furniture Assembly Manufacturing Quality Inspection Finishing Hand Tools Repair

Typical employer expectations

  • Apply role-specific judgment in furniture assembly
  • Keep manufacturing organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on quality inspection tasks
  • Maintain safe, dependable follow-through while supporting finishing

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a material handler, you will work on material handling, warehouse operations, forklift operation, inventory management, and safety compliance while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Material Handling Warehouse Operations Forklift Operation Inventory Management Safety Compliance Shipping and Receiving

Typical employer expectations

  • Apply role-specific judgment in material handling
  • Keep warehouse operations organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on forklift operation tasks
  • Maintain safe, dependable follow-through while supporting inventory management

Employers also commonly look for

  • Education: Some employers may expect some secondary school preparation.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a labourer in processing, manufacturing and utilities, you will help move materials, sort and package products, assist machine operators and other workers, and keep work areas clean and organized. Employers usually look for someone who can follow instructions, work safely, and stay dependable during routine production support tasks.

Role signals
Material Handling Product Packaging Production Line Support Machine Assistance Plant Clean-Up Quality Checking

Typical employer expectations

  • Support material handling and movement of raw materials, finished products, or equipment
  • Help sort, pack, crate, check, or weigh materials and products
  • Assist machine operators, assemblers, and other workers with routine production tasks
  • Keep work areas and equipment clean while following workplace safety procedures

Employers also commonly look for

  • Education: Some employers may expect some secondary school preparation.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a cabinetmaker, you will work on material handling, installation and repair, and technical troubleshooting while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Material Handling Installation and Repair Technical Troubleshooting

Typical employer expectations

  • Apply role-specific judgment in material handling
  • Keep installation and repair organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on technical troubleshooting tasks

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a cabinetmaker, you will work on material handling, installation and repair, and technical troubleshooting while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Material Handling Installation and Repair Technical Troubleshooting

Typical employer expectations

  • Apply role-specific judgment in material handling
  • Keep installation and repair organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on technical troubleshooting tasks

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As an electrical mechanics, you will work on safety compliance, troubleshooting, electrical maintenance, installation, and electrical systems while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Safety Compliance Troubleshooting Electrical Maintenance Installation Electrical Systems Repair

Typical employer expectations

  • Apply role-specific judgment in safety compliance
  • Keep troubleshooting organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on electrical maintenance tasks
  • Maintain safe, dependable follow-through while supporting installation

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a drafting technologist and technician, you will work on technical drawing, cad design, engineering, engineering support, and cad software while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Technical Drawing Cad Design Engineering Engineering Support Cad Software Construction Operations

Typical employer expectations

  • Apply role-specific judgment in technical drawing
  • Keep cad design organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on engineering tasks
  • Maintain safe, dependable follow-through while supporting engineering support

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a supervisor, furniture, and fixtures manufacturing, you will work on quality control, production coordination, staff training, furniture manufacturing, and manufacturing supervision while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Quality Control Production Coordination Staff Training Furniture Manufacturing Manufacturing Supervision Team Supervision

Typical employer expectations

  • Apply role-specific judgment in quality control
  • Keep production coordination organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on staff training tasks
  • Maintain safe, dependable follow-through while supporting furniture manufacturing

Employers also commonly look for

  • Education: Some employers may expect some secondary school preparation.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

LMIA Pathway Insight

Read the employer record like a candidate strategist

These LMIA pathway signals are based on Mobilier de bureau logiflex inc.'s visible role mix, latest activity in January to March 2025, and the occupations that stand out most on this employer record: Furniture and fixture assemblers and inspectors, Machinists and machining and tooling inspectors, Shippers and receivers.

Confidence signal

LMIA validity confidence

Promising confidence
Based on 3 approved positions in the latest visible period and the activity in January to March 2025, this employer reflects a Promising level of international talent hiring activity in Canada.

Employer continuity

Employer consistency insight

Active in 2025
This employer has appeared in LMIA records across 4 different years, showing a steady long-term hiring presence.

Occupation mix

Occupation diversity insight

Furniture and fixture assemblers and inspectors, Machinists and machining and tooling inspectors, Shippers and receivers
The employer has hired under 11 distinct occupations over time, suggesting a broad workforce composition.

Demand pattern

Retention and continuity insight

Fairly Positive
This employer has reapplied for some occupations across multiple years, suggesting recurring demand and workforce continuity.

Work-to-PR alignment

Pathway alignment for candidates

Emerging PR Pathway Fit
Based on this employer’s LMIA track record, location, and pathway fit, the available signals indicate a Emerging PR Pathway Fit level of alignment with employer-driven PR pathways in Canada.
Express Entry Provincial Nominee Program

Final takeaway

How to read this employer page

Visible demand in Quebec
Mobilier de bureau logiflex inc. shows promising LMIA hiring confidence based on the published employer record. The latest visible activity appears in January to March 2025. Visible sponsoring history includes roles such as Furniture and fixture assemblers and inspectors, Machinists and machining and tooling inspectors, Shippers and receivers. The current record set points to demand in Quebec. Candidates who align their experience, NOC fit, and resume presentation to this employer profile can build a stronger application path.

Employer footprint

Visible hiring footprint and timeline

Mobilier de bureau logiflex inc. shows visible activity across 1 provinces and 2 streams. Use this footprint to judge where and how the employer's LMIA-supported hiring has been concentrated.

Visible LMIA activity timeline

Latest visible activity appears in January to March 2025. The timeline below groups approved positions by visible year and quarter so you can see how this employer record is distributed over time.

2025 January to March
3 approved positions
2024 October to December
8 approved positions
2024 April to June
9 approved positions
2024 January to March
1 approved positions
2023 October to December
4 approved positions
2023 April to June
11 approved positions
2022 October to December
28 approved positions
2022 July to September
4 approved positions

Provinces with visible records

Quebec

Streams represented

Low Wage High Wage

Related employer records

Only one employer record is visible for this profile.

Searcher questions

Questions candidates usually want answered on an employer page

These answers use Mobilier de bureau logiflex inc.'s visible role mix, location footprint, and LMIA history so candidates can decide faster whether this employer is worth targeting.

Has Mobilier de bureau logiflex inc. hired foreign workers before?

Mobilier de bureau logiflex inc. shows a visible LMIA-related employer record with 68 approved positions on record. The latest visible activity appears in January to March 2025.

Which roles stand out most on this employer page?

The strongest visible role signals are Furniture and fixture assemblers and inspectors, Machinists and machining and tooling inspectors, Shippers and receivers. These are usually the best starting points when deciding whether your current job title and experience fit this employer.

Where is this employer's visible activity concentrated?

Mobilier de bureau logiflex inc. shows visible demand in Quebec. Stream coverage currently points to Low Wage, High Wage.

How should I use this page before creating a profile?

Start by checking whether your experience aligns to Furniture and fixture assemblers and inspectors, Machinists and machining and tooling inspectors, then review the sponsoring roles and recent timeline. If the fit looks strong, create a profile so your job title and resume can be matched to employers with similar visible demand.

Is this page useful for PR or work permit planning?

Based on this employer’s LMIA track record, location, and pathway fit, the available signals indicate a Emerging PR Pathway Fit level of alignment with employer-driven PR pathways in Canada. Use this page as employer and role research, not as a guarantee of PR or a live job offer.

Market context

Employers like this have hired international talent across related roles

These related-role counts show how Mobilier de bureau logiflex inc. compares with broader visible LMIA demand in occupations connected to Furniture and fixture assemblers and inspectors, Machinists and machining and tooling inspectors.

Cabinetmakers

272+ Canadian employers have filed visible LMIA demand.

474 total approved positions are represented in related records.

Drafting technologists and technicians

251+ Canadian employers have filed visible LMIA demand.

309 total approved positions are represented in related records.

Material handlers

558+ Canadian employers have filed visible LMIA demand.

1,555 total approved positions are represented in related records.

Furniture and fixture assemblers, finishers, refinishers and inspectors

56+ Canadian employers have filed visible LMIA demand.

211 total approved positions are represented in related records.

Supervisors, furniture and fixtures manufacturing

31+ Canadian employers have filed visible LMIA demand.

37 total approved positions are represented in related records.

Furniture and fixture assemblers and inspectors

80+ Canadian employers have filed visible LMIA demand.

549 total approved positions are represented in related records.

Candidate roadmap

How to move from employer research to a profile employers can actually review

Employers similar to this one have hired international workers for roles like these.
Creating your LMIA-Ready Resume helps you stay visible when matching opportunities become available.
  1. Enter your current job title so the platform can map the strongest LMIA-aligned occupations.
  2. Build your profile in about 60 seconds and publish a Canada-ready presentation employers can review.
  3. Use your LMIA-ready resume and cover letter to stay visible when verified employers reopen matching intake.

Create a Profile for Employers Like This

High value: 45 days of visibility plus a Canada-standard AI cover letter tailored to your profile.

Candidate readiness for LMIA employers in Canada

Employer Hiring Support

Recruitment services for Canadian employers handled through VisaTalents Global Recruiting Inc — in accordance with applicable Canadian employment standards.

Why VisaTalents works

  • Dedicated LMIA intelligence platform connected to verified employers.
  • Compliance-focused workflows built around Canadian recruitment requirements.
  • AI-assisted role mapping to improve NOC and TEER alignment before employers review the profile.

Contains information licensed under the Open Government Licence - Canada. VisaTalents adds its own data intelligence and may incorporate data collected from multiple information providers where applicable. Data accuracy, current openings, and employer requirements may vary.

Cookie Notice

We use cookies and similar technologies to operate the site, remember preferences, improve performance, and measure traffic. Review our Privacy Policy.