Employer Intelligence Profile

MANAC INC LMIA employer profile

St-Georges de Beauce, G5Y8G6

MANAC INC appears in the visible LMIA employer record set with 538 approved positions across 28 sponsoring role tracks in Quebec. The clearest role signals are Welders and related machine operators, Motor vehicle assemblers, inspectors and testers, Automotive service technicians, truck and bus mechanics and mechanical repairers, and the latest visible activity appears in October to December 2025.

Hiring foreign workers: Yes Active in 2025

Executive summary

Approved positions on record 538
Sponsoring job tracks 28
Provinces in scope 1
Latest visible activity October to December 2025

Visible streams: 3 | Core stream mix: Low Wage, High Wage, Unclassified

Confidence Strong hiring confidence
Pathway fit Potential PR Pathway Fit
Role mix Welders and related machine operators, Motor vehicle assemblers, inspectors and testers, Automotive service technicians, truck and bus mechanics and mechanical repairers

Sponsoring roles

Sponsoring jobs with LMIA support

MANAC INC currently shows 28 sponsoring role tracks and 538 approved positions on record. The clearest role signals on this page are Welders and related machine operators, Motor vehicle assemblers, inspectors and testers, Automotive service technicians, truck and bus mechanics and mechanical repairers.

Welders and related machine operators This sponsoring role is shown with the legacy NOC 2016 code carried in the historical LMIA record. Older employer records can use 4-digit codes even when the newer Canadian classification now uses 5-digit NOCs. Legacy NOC 7237 TEER N/A Quebec High Wage 258 positions $25 - $40/hr

As a welder and related machine operator, you will work on blueprint reading, metal fabrication, welding, machine operation, and quality control while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Blueprint Reading Metal Fabrication Welding Machine Operation Quality Control Manufacturing

Typical employer expectations

  • Apply role-specific judgment in blueprint reading
  • Keep metal fabrication organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on welding tasks
  • Maintain safe, dependable follow-through while supporting machine operation

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a motor vehicle assembler, inspector, and tester, you will work on manufacturing, automotive assembly, inspection, quality control, and quality inspection while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Manufacturing Automotive Assembly Inspection Quality Control Quality Inspection Safety Standards

Typical employer expectations

  • Apply role-specific judgment in manufacturing
  • Keep automotive assembly organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on inspection tasks
  • Maintain safe, dependable follow-through while supporting quality control

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Employers may provide role-specific training after hire.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As an automotive service technician, truck, bus mechanics, and mechanical repairer, you will work on automotive repair, customer or client service, diagnostics, hands-on work, and mechanical maintenance while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Automotive Repair Customer Service Diagnostics Hands-On Work Mechanical Maintenance Vehicle Safety

Typical employer expectations

  • Apply role-specific judgment in automotive repair
  • Keep customer or client service organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on diagnostics tasks
  • Maintain safe, dependable follow-through while supporting hands-on work

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a welder and related machine operator, you will work on metal fabrication, quality control, welding, blueprint reading, and machine operation while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Metal Fabrication Quality Control Welding Blueprint Reading Machine Operation Manufacturing

Typical employer expectations

  • Apply role-specific judgment in metal fabrication
  • Keep quality control organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on welding tasks
  • Maintain safe, dependable follow-through while supporting blueprint reading

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a mechanical assembler and inspector, you will work on manufacturing, mechanical assembly, quality inspection, attention to detail, and safety compliance while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Manufacturing Mechanical Assembly Quality Inspection Attention to Detail Safety Compliance Hand Tools

Typical employer expectations

  • Apply role-specific judgment in manufacturing
  • Keep mechanical assembly organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on quality inspection tasks
  • Maintain safe, dependable follow-through while supporting attention to detail

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a metalworking and forging machine operator, you will work on machine operation, manufacturing, quality control, safety compliance, and production while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Machine Operation Manufacturing Quality Control Safety Compliance Production Blueprint Reading

Typical employer expectations

  • Apply role-specific judgment in machine operation
  • Keep manufacturing organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on quality control tasks
  • Maintain safe, dependable follow-through while supporting safety compliance

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As an automotive service technician, truck, bus mechanics, and mechanical repairer, you will work on automotive repair, customer or client service, diagnostics, mechanical skills, and vehicle maintenance while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Automotive Repair Customer Service Diagnostics Mechanical Skills Vehicle Maintenance Safety Compliance

Typical employer expectations

  • Apply role-specific judgment in automotive repair
  • Keep customer or client service organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on diagnostics tasks
  • Maintain safe, dependable follow-through while supporting mechanical skills

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As an industrial painter, coater, and metal finishing process operator, you will work on surface preparation, spray coating, metal finishing, protective coatings, and equipment operation while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Surface Preparation Spray Coating Metal Finishing Protective Coatings Equipment Operation Paint Mixing

Typical employer expectations

  • Apply role-specific judgment in surface preparation
  • Keep spray coating organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on metal finishing tasks
  • Maintain safe, dependable follow-through while supporting protective coatings

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a mechanical assembler and inspector, you will work on manufacturing, mechanical assembly, quality inspection, attention to detail, and blueprint reading while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Manufacturing Mechanical Assembly Quality Inspection Attention to Detail Blueprint Reading Hand Tools

Typical employer expectations

  • Apply role-specific judgment in manufacturing
  • Keep mechanical assembly organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on quality inspection tasks
  • Maintain safe, dependable follow-through while supporting attention to detail

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a sheet metal worker, you will work on sheet metal fabrication, blueprint reading, installation, construction operations, and safety compliance while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Sheet Metal Fabrication Blueprint Reading Installation Construction Operations Safety Compliance Metalworking

Typical employer expectations

  • Apply role-specific judgment in sheet metal fabrication
  • Keep blueprint reading organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on installation tasks
  • Maintain safe, dependable follow-through while supporting construction operations

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a heavy-duty equipment mechanics, you will work on maintenance, diagnostics, construction operations, construction equipment, and repair while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Maintenance Diagnostics Construction Operations Construction Equipment Repair Heavy Equipment Repair

Typical employer expectations

  • Apply role-specific judgment in maintenance
  • Keep diagnostics organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on construction operations tasks
  • Maintain safe, dependable follow-through while supporting construction equipment

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As an electrical mechanics, you will work on safety compliance, troubleshooting, electrical maintenance, installation, and electrical systems while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Safety Compliance Troubleshooting Electrical Maintenance Installation Electrical Systems Maintenance

Typical employer expectations

  • Apply role-specific judgment in safety compliance
  • Keep troubleshooting organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on electrical maintenance tasks
  • Maintain safe, dependable follow-through while supporting installation

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As an industrial painter, coater, and metal finishing process operator, you will work on surface preparation, spray coating, metal finishing, protective coatings, and equipment operation while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Surface Preparation Spray Coating Metal Finishing Protective Coatings Equipment Operation Paint Mixing

Typical employer expectations

  • Apply role-specific judgment in surface preparation
  • Keep spray coating organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on metal finishing tasks
  • Maintain safe, dependable follow-through while supporting protective coatings

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a machining tool operator, you will work on quality control, precision engineering, machine operation, metalworking, and manufacturing while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Quality Control Precision Engineering Machine Operation Metalworking Manufacturing Technical Drawings

Typical employer expectations

  • Apply role-specific judgment in quality control
  • Keep precision engineering organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on machine operation tasks
  • Maintain safe, dependable follow-through while supporting metalworking

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a labourers in metal fabrication, you will work on manufacturing, safety compliance, assembly, welding, and machinery operation while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Manufacturing Safety Compliance Assembly Welding Machinery Operation Quality Control

Typical employer expectations

  • Apply role-specific judgment in manufacturing
  • Keep safety compliance organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on assembly tasks
  • Maintain safe, dependable follow-through while supporting welding

Employers also commonly look for

  • Education: Some employers may expect some secondary school preparation.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a purchasing and inventory control worker, you will work on inventory management, market analysis, procurement, stock control, and supplier negotiation while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Inventory Management Market Analysis Procurement Stock Control Supplier Negotiation

Typical employer expectations

  • Apply role-specific judgment in inventory management
  • Keep market analysis organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on procurement tasks
  • Maintain safe, dependable follow-through while supporting stock control

Employers also commonly look for

  • Education: Some employers may expect some secondary school preparation.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a sheet metal worker, you will work on blueprint reading, sheet metal fabrication, construction operations, installation, and safety compliance while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Blueprint Reading Sheet Metal Fabrication Construction Operations Installation Safety Compliance Metalworking

Typical employer expectations

  • Apply role-specific judgment in blueprint reading
  • Keep sheet metal fabrication organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on construction operations tasks
  • Maintain safe, dependable follow-through while supporting installation

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a material handler, you will work on material handling, warehouse operations, forklift operation, inventory management, and safety compliance while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Material Handling Warehouse Operations Forklift Operation Inventory Management Safety Compliance Loading and Unloading

Typical employer expectations

  • Apply role-specific judgment in material handling
  • Keep warehouse operations organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on forklift operation tasks
  • Maintain safe, dependable follow-through while supporting inventory management

Employers also commonly look for

  • Education: Some employers may expect some secondary school preparation.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a metalworking and forging machine operator, you will work on machine operation, manufacturing, quality control, safety compliance, and blueprint reading while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Machine Operation Manufacturing Quality Control Safety Compliance Blueprint Reading Production

Typical employer expectations

  • Apply role-specific judgment in machine operation
  • Keep manufacturing organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on quality control tasks
  • Maintain safe, dependable follow-through while supporting safety compliance

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a structural metal, platework fabricator, and fitter, you will work on metal fabrication, welding, blueprint reading, assembly, and quality control while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Metal Fabrication Welding Blueprint Reading Assembly Quality Control Structural Engineering

Typical employer expectations

  • Apply role-specific judgment in metal fabrication
  • Keep welding organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on blueprint reading tasks
  • Maintain safe, dependable follow-through while supporting assembly

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a cook, you will work on menu planning, food preparation, culinary arts, kitchen management, and food safety while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Menu Planning Food Preparation Culinary Arts Kitchen Management Food Safety Team Leadership

Typical employer expectations

  • Apply role-specific judgment in menu planning
  • Keep food preparation organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on culinary arts tasks
  • Maintain safe, dependable follow-through while supporting kitchen management

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As an electrical mechanics, you will work on safety compliance, troubleshooting, electrical maintenance, installation, and electrical systems while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Safety Compliance Troubleshooting Electrical Maintenance Installation Electrical Systems Repair

Typical employer expectations

  • Apply role-specific judgment in safety compliance
  • Keep troubleshooting organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on electrical maintenance tasks
  • Maintain safe, dependable follow-through while supporting installation

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As an electricians (except industrial and power system), you will work on electrical systems, industrial maintenance, safety compliance, and troubleshooting while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Electrical Systems Industrial Maintenance Safety Compliance Troubleshooting

Typical employer expectations

  • Apply role-specific judgment in electrical systems
  • Keep industrial maintenance organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on safety compliance tasks
  • Maintain safe, dependable follow-through while supporting troubleshooting

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As an electronics assembler, fabricator, inspector, and tester, you will work on electronics assembly, manufacturing, quality inspection, troubleshooting, and hands-on work while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Electronics Assembly Manufacturing Quality Inspection Troubleshooting Hands-On Work Testing

Typical employer expectations

  • Apply role-specific judgment in electronics assembly
  • Keep manufacturing organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on quality inspection tasks
  • Maintain safe, dependable follow-through while supporting troubleshooting

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a machinist, machining, and tooling inspector, you will work on precision engineering, quality control, manufacturing, machine operation, and tooling inspection while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Precision Engineering Quality Control Manufacturing Machine Operation Tooling Inspection Blueprint Reading

Typical employer expectations

  • Apply role-specific judgment in precision engineering
  • Keep quality control organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on manufacturing tasks
  • Maintain safe, dependable follow-through while supporting machine operation

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a material handler, you will work on material handling, warehouse operations, forklift operation, inventory management, and safety compliance while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Material Handling Warehouse Operations Forklift Operation Inventory Management Safety Compliance Shipping and Receiving

Typical employer expectations

  • Apply role-specific judgment in material handling
  • Keep warehouse operations organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on forklift operation tasks
  • Maintain safe, dependable follow-through while supporting inventory management

Employers also commonly look for

  • Education: Some employers may expect some secondary school preparation.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a metal products machine operator, you will work on machine operation, quality control, manufacturing, maintenance, and metal production while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Machine Operation Quality Control Manufacturing Maintenance Metal Production Production Records

Typical employer expectations

  • Apply role-specific judgment in machine operation
  • Keep quality control organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on manufacturing tasks
  • Maintain safe, dependable follow-through while supporting maintenance

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a purchasing and inventory control worker, you will work on inventory management, market analysis, supplier negotiation, supply chain, and negotiation while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Inventory Management Market Analysis Supplier Negotiation Supply Chain Negotiation Procurement

Typical employer expectations

  • Apply role-specific judgment in inventory management
  • Keep market analysis organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on supplier negotiation tasks
  • Maintain safe, dependable follow-through while supporting supply chain

Employers also commonly look for

  • Education: Some employers may expect some secondary school preparation.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

LMIA Pathway Insight

Read the employer record like a candidate strategist

These LMIA pathway signals are based on MANAC INC's visible role mix, latest activity in October to December 2025, and the occupations that stand out most on this employer record: Welders and related machine operators, Motor vehicle assemblers, inspectors and testers, Automotive service technicians, truck and bus mechanics and mechanical repairers.

Confidence signal

LMIA validity confidence

Strong confidence
Based on 46 approved positions in the latest visible period and the activity in October to December 2025, this employer reflects a Strong level of international talent hiring activity in Canada.

Employer continuity

Employer consistency insight

Active in 2025
This employer has appeared in LMIA records across 10 different years, showing a steady long-term hiring presence.

Occupation mix

Occupation diversity insight

Welders and related machine operators, Motor vehicle assemblers, inspectors and testers, Automotive service technicians, truck and bus mechanics and mechanical repairers
The employer has hired under 28 distinct occupations over time, suggesting a broad workforce composition.

Demand pattern

Retention and continuity insight

Fairly Positive
This employer has reapplied for some occupations across multiple years, suggesting recurring demand and workforce continuity.

Work-to-PR alignment

Pathway alignment for candidates

Potential PR Pathway Fit
This employer’s hiring history and pathway signals reflect a Potential PR Pathway Fit level of alignment with work-to-PR opportunities commonly linked to employer-supported immigration streams in Canada.
Express Entry Provincial Nominee Program

Final takeaway

How to read this employer page

Visible demand in Quebec
MANAC INC shows strong LMIA hiring confidence based on the published employer record. The latest visible activity appears in October to December 2025. Visible sponsoring history includes roles such as Welders and related machine operators, Motor vehicle assemblers, inspectors and testers, Automotive service technicians, truck and bus mechanics and mechanical repairers. The current record set points to demand in Quebec. Candidates who align their experience, NOC fit, and resume presentation to this employer profile can build a stronger application path.

Employer footprint

Visible hiring footprint and timeline

MANAC INC shows visible activity across 1 provinces and 3 streams. Use this footprint to judge where and how the employer's LMIA-supported hiring has been concentrated.

Visible LMIA activity timeline

Latest visible activity appears in October to December 2025. The timeline below groups approved positions by visible year and quarter so you can see how this employer record is distributed over time.

2025 October to December
46 approved positions
2025 July to September
7 approved positions
2025 April to June
2 approved positions
2024 October to December
3 approved positions
2024 July to September
8 approved positions
2024 April to June
14 approved positions
2024 January to March
8 approved positions
2023 October to December
64 approved positions

Provinces with visible records

Quebec

Streams represented

Low Wage High Wage Unclassified

Related employer records

MANAC INC - St-Georges de Beauce, G5Y8G6 Manac Inc. - St-Georges, QC G5Y 8G6

Searcher questions

Questions candidates usually want answered on an employer page

These answers use MANAC INC's visible role mix, location footprint, and LMIA history so candidates can decide faster whether this employer is worth targeting.

Has MANAC INC hired foreign workers before?

MANAC INC shows a visible LMIA-related employer record with 538 approved positions on record. The latest visible activity appears in October to December 2025.

Which roles stand out most on this employer page?

The strongest visible role signals are Welders and related machine operators, Motor vehicle assemblers, inspectors and testers, Automotive service technicians, truck and bus mechanics and mechanical repairers. These are usually the best starting points when deciding whether your current job title and experience fit this employer.

Where is this employer's visible activity concentrated?

MANAC INC shows visible demand in Quebec. Stream coverage currently points to Low Wage, High Wage, Unclassified.

How should I use this page before creating a profile?

Start by checking whether your experience aligns to Welders and related machine operators, Motor vehicle assemblers, inspectors and testers, then review the sponsoring roles and recent timeline. If the fit looks strong, create a profile so your job title and resume can be matched to employers with similar visible demand.

Is this page useful for PR or work permit planning?

This employer’s hiring history and pathway signals reflect a Potential PR Pathway Fit level of alignment with work-to-PR opportunities commonly linked to employer-supported immigration streams in Canada. Use this page as employer and role research, not as a guarantee of PR or a live job offer.

Market context

Employers like this have hired international talent across related roles

These related-role counts show how MANAC INC compares with broader visible LMIA demand in occupations connected to Welders and related machine operators, Motor vehicle assemblers, inspectors and testers.

Automotive service technicians, truck and bus mechanics and mechanical repairers

1,281+ Canadian employers have filed visible LMIA demand.

2,468 total approved positions are represented in related records.

Electrical mechanics

297+ Canadian employers have filed visible LMIA demand.

617 total approved positions are represented in related records.

Mechanical assemblers and inspectors

34+ Canadian employers have filed visible LMIA demand.

102 total approved positions are represented in related records.

Sheet metal workers

74+ Canadian employers have filed visible LMIA demand.

173 total approved positions are represented in related records.

Welders and related machine operators

985+ Canadian employers have filed visible LMIA demand.

3,133 total approved positions are represented in related records.

Industrial painters, coaters and metal finishing process operators

102+ Canadian employers have filed visible LMIA demand.

269 total approved positions are represented in related records.

Candidate roadmap

How to move from employer research to a profile employers can actually review

Comparable employers in public LMIA reference data have recruited international talent for positions like these. A completed LMIA-Ready Resume can improve your visibility for future openings.
  1. Enter your current job title so the platform can map the strongest LMIA-aligned occupations.
  2. Build your profile in about 60 seconds and publish a Canada-ready presentation employers can review.
  3. Use your LMIA-ready resume and cover letter to stay visible when verified employers reopen matching intake.

Create a Profile for Employers Like This

High value: 45 days of visibility plus a Canada-standard AI cover letter tailored to your profile.

Candidate readiness for LMIA employers in Canada

Employer Hiring Support

Recruitment services for Canadian employers handled through VisaTalents Global Recruiting Inc — in accordance with applicable Canadian employment standards.

Why VisaTalents works

  • Dedicated LMIA intelligence platform connected to verified employers.
  • Compliance-focused workflows built around Canadian recruitment requirements.
  • AI-assisted role mapping to improve NOC and TEER alignment before employers review the profile.

Contains information licensed under the Open Government Licence - Canada. VisaTalents adds its own data intelligence and may incorporate data collected from multiple information providers where applicable. Data accuracy, current openings, and employer requirements may vary.

Cookie Notice

We use cookies and similar technologies to operate the site, remember preferences, improve performance, and measure traffic. Review our Privacy Policy.