Employer Intelligence Profile

Composites Leclair inc. LMIA employer profile

MONTRÉAL, QC H2Y 1X4

Composites Leclair inc. appears in the visible LMIA employer record set with 12 approved positions across 4 sponsoring role tracks in Quebec. The clearest role signals are Plastic products assemblers, finishers and inspectors, Drafting technologists and technicians, Machining tool operators, and the latest visible activity appears in July to September 2019.

Hiring foreign workers: Yes Active in 2019

Executive summary

Approved positions on record 12
Sponsoring job tracks 4
Provinces in scope 1
Latest visible activity July to September 2019

Visible streams: 2 | Core stream mix: Low Wage, High Wage

Confidence Emerging hiring confidence
Pathway fit Emerging PR Pathway Fit
Role mix Plastic products assemblers, finishers and inspectors, Drafting technologists and technicians, Machining tool operators

Sponsoring roles

Sponsoring jobs with LMIA support

Composites Leclair inc. currently shows 4 sponsoring role tracks and 12 approved positions on record. The clearest role signals on this page are Plastic products assemblers, finishers and inspectors, Drafting technologists and technicians, Machining tool operators.

Plastic products assemblers, finishers and inspectors This sponsoring role is shown with the legacy NOC 2016 code carried in the historical LMIA record. Older employer records can use 4-digit codes even when the newer Canadian classification now uses 5-digit NOCs. Legacy NOC 9535 TEER N/A Quebec High Wage 6 positions $15 - $25/hr

As a plastic products assembler, finisher, and inspector, you will work on manufacturing, inspection, quality control, assembly line, and finishing while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Manufacturing Inspection Quality Control Assembly Line Finishing Production

Typical employer expectations

  • Apply role-specific judgment in manufacturing
  • Keep inspection organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on quality control tasks
  • Maintain safe, dependable follow-through while supporting assembly line

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a drafting technologist and technician, you will work on technical drawing, cad design, engineering, construction operations, and engineering support while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Technical Drawing Cad Design Engineering Construction Operations Engineering Support Architectural Technology

Typical employer expectations

  • Apply role-specific judgment in technical drawing
  • Keep cad design organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on engineering tasks
  • Maintain safe, dependable follow-through while supporting construction operations

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a machining tool operator, you will work on quality control, precision engineering, machine operation, metalworking, and manufacturing while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Quality Control Precision Engineering Machine Operation Metalworking Manufacturing Technical Drawings

Typical employer expectations

  • Apply role-specific judgment in quality control
  • Keep precision engineering organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on machine operation tasks
  • Maintain safe, dependable follow-through while supporting metalworking

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a machinist, machining, and tooling inspector, you will work on precision engineering, quality control, manufacturing, machine operation, and tooling inspection while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Precision Engineering Quality Control Manufacturing Machine Operation Tooling Inspection Blueprint Reading

Typical employer expectations

  • Apply role-specific judgment in precision engineering
  • Keep quality control organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on manufacturing tasks
  • Maintain safe, dependable follow-through while supporting machine operation

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

LMIA Pathway Insight

Read the employer record like a candidate strategist

These LMIA pathway signals are based on Composites Leclair inc.'s visible role mix, latest activity in July to September 2019, and the occupations that stand out most on this employer record: Plastic products assemblers, finishers and inspectors, Drafting technologists and technicians, Machining tool operators.

Confidence signal

LMIA validity confidence

Emerging confidence
Based on 4 approved positions in the latest visible period and the recent activity in July to September 2019, this employer reflects a Emerging level of international talent hiring activity in Canada.

Employer continuity

Employer consistency insight

Active in 2019
This employer has at least one year of LMIA activity on record, indicating prior authorization to hire foreign workers.

Occupation mix

Occupation diversity insight

Plastic products assemblers, finishers and inspectors, Drafting technologists and technicians, Machining tool operators
The employer’s LMIA history includes more than one NOC category, indicating diverse staffing needs.

Demand pattern

Retention and continuity insight

Fairly Positive
LMIA records indicate employer hiring activity, which may reflect project-based, seasonal, or evolving workforce demand across hiring cycles.

Work-to-PR alignment

Pathway alignment for candidates

Emerging PR Pathway Fit
LMIA activity, pathway tags, and employer location together suggest a Emerging PR Pathway Fit level of relevance for candidates exploring employer-linked PR pathways in Canada.
Express Entry Provincial Nominee Program

Final takeaway

How to read this employer page

Visible demand in Quebec
Composites Leclair inc. shows emerging LMIA hiring confidence based on the published employer record. The latest visible activity appears in July to September 2019. Visible sponsoring history includes roles such as Plastic products assemblers, finishers and inspectors, Drafting technologists and technicians, Machining tool operators. The current record set points to demand in Quebec. Candidates who align their experience, NOC fit, and resume presentation to this employer profile can build a stronger application path.

Employer footprint

Visible hiring footprint and timeline

Composites Leclair inc. shows visible activity across 1 provinces and 2 streams. Use this footprint to judge where and how the employer's LMIA-supported hiring has been concentrated.

Visible LMIA activity timeline

Latest visible activity appears in July to September 2019. The timeline below groups approved positions by visible year and quarter so you can see how this employer record is distributed over time.

2019 July to September
4 approved positions
2019 April to June
2 approved positions
2019 January to March
6 approved positions

Provinces with visible records

Quebec

Streams represented

Low Wage High Wage

Related employer records

Only one employer record is visible for this profile.

Searcher questions

Questions candidates usually want answered on an employer page

These answers use Composites Leclair inc.'s visible role mix, location footprint, and LMIA history so candidates can decide faster whether this employer is worth targeting.

Has Composites Leclair inc. hired foreign workers before?

Composites Leclair inc. shows a visible LMIA-related employer record with 12 approved positions on record. The latest visible activity appears in July to September 2019.

Which roles stand out most on this employer page?

The strongest visible role signals are Plastic products assemblers, finishers and inspectors, Drafting technologists and technicians, Machining tool operators. These are usually the best starting points when deciding whether your current job title and experience fit this employer.

Where is this employer's visible activity concentrated?

Composites Leclair inc. shows visible demand in Quebec. Stream coverage currently points to Low Wage, High Wage.

How should I use this page before creating a profile?

Start by checking whether your experience aligns to Plastic products assemblers, finishers and inspectors, Drafting technologists and technicians, then review the sponsoring roles and recent timeline. If the fit looks strong, create a profile so your job title and resume can be matched to employers with similar visible demand.

Is this page useful for PR or work permit planning?

LMIA activity, pathway tags, and employer location together suggest a Emerging PR Pathway Fit level of relevance for candidates exploring employer-linked PR pathways in Canada. Use this page as employer and role research, not as a guarantee of PR or a live job offer.

Market context

Employers like this have hired international talent across related roles

These related-role counts show how Composites Leclair inc. compares with broader visible LMIA demand in occupations connected to Plastic products assemblers, finishers and inspectors, Drafting technologists and technicians.

Machining tool operators

147+ Canadian employers have filed visible LMIA demand.

380 total approved positions are represented in related records.

Machinists and machining and tooling inspectors

972+ Canadian employers have filed visible LMIA demand.

4,537 total approved positions are represented in related records.

Drafting technologists and technicians

419+ Canadian employers have filed visible LMIA demand.

581 total approved positions are represented in related records.

Plastic products assemblers, finishers and inspectors

82+ Canadian employers have filed visible LMIA demand.

943 total approved positions are represented in related records.

Candidate roadmap

How to move from employer research to a profile employers can actually review

LMIA-active employers with similar hiring patterns often recruit candidates for roles like these. Building your LMIA-Ready Resume helps employers discover your profile faster.
  1. Enter your current job title so the platform can map the strongest LMIA-aligned occupations.
  2. Build your profile in about 60 seconds and publish a Canada-ready presentation employers can review.
  3. Use your LMIA-ready resume and cover letter to stay visible when verified employers reopen matching intake.

Create a Profile for Employers Like This

High value: 45 days of visibility plus a Canada-standard AI cover letter tailored to your profile.

Candidate readiness for LMIA employers in Canada

Employer Hiring Support

Recruitment services for Canadian employers handled through VisaTalents Global Recruiting Inc — in accordance with applicable Canadian employment standards.

Why VisaTalents works

  • Dedicated LMIA intelligence platform connected to verified employers.
  • Compliance-focused workflows built around Canadian recruitment requirements.
  • AI-assisted role mapping to improve NOC and TEER alignment before employers review the profile.

Contains information licensed under the Open Government Licence - Canada. VisaTalents adds its own data intelligence and may incorporate data collected from multiple information providers where applicable. Data accuracy, current openings, and employer requirements may vary.

Cookie Notice

We use cookies and similar technologies to operate the site, remember preferences, improve performance, and measure traffic. Review our Privacy Policy.