Employer Intelligence Profile

A&H Stone Ltd LMIA employer profile

Richmond, V6V1K9

A&H Stone Ltd appears in the visible LMIA employer record set with 6 approved positions across 6 sponsoring role tracks in British Columbia. The clearest role signals are Bricklayers, Machining tool operators, Machinists and machining and tooling inspectors, and the latest visible activity appears in October to December 2025.

Hiring foreign workers: Yes Active in 2025

Executive summary

Approved positions on record 6
Sponsoring job tracks 6
Provinces in scope 1
Latest visible activity October to December 2025

Visible streams: 3 | Core stream mix: High Wage, Low Wage, Unclassified

Confidence Emerging hiring confidence
Pathway fit Emerging PR Pathway Fit
Role mix Bricklayers, Machining tool operators, Machinists and machining and tooling inspectors

Sponsoring roles

Sponsoring jobs with LMIA support

A&H Stone Ltd currently shows 6 sponsoring role tracks and 6 approved positions on record. The clearest role signals on this page are Bricklayers, Machining tool operators, Machinists and machining and tooling inspectors.

Bricklayers This sponsoring role is shown with the legacy NOC 2016 code carried in the historical LMIA record. Older employer records can use 4-digit codes even when the newer Canadian classification now uses 5-digit NOCs. Legacy NOC 7281 TEER N/A British Columbia High Wage 1 positions $30 - $45/hr

As a bricklayer, you will work on clean-up and sanitation, construction operations, installation and repair, construction support, and material handling while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Clean-Up and Sanitation Construction Operations Installation and Repair Construction Support Material Handling Technical Troubleshooting

Typical employer expectations

  • Apply role-specific judgment in clean-up and sanitation
  • Keep construction operations organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on installation and repair tasks
  • Maintain safe, dependable follow-through while supporting construction support

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a machining tool operator, you will work on precision engineering, machine operation, metalworking, quality control, and technical drawings while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Precision Engineering Machine Operation Metalworking Quality Control Technical Drawings Manufacturing

Typical employer expectations

  • Apply role-specific judgment in precision engineering
  • Keep machine operation organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on metalworking tasks
  • Maintain safe, dependable follow-through while supporting quality control

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a machinist, machining, and tooling inspector, you will work on precision engineering, quality control, manufacturing, machine operation, and tooling inspection while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Precision Engineering Quality Control Manufacturing Machine Operation Tooling Inspection Blueprint Reading

Typical employer expectations

  • Apply role-specific judgment in precision engineering
  • Keep quality control organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on manufacturing tasks
  • Maintain safe, dependable follow-through while supporting machine operation

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a material handler, you will work on material handling, warehouse operations, forklift operation, inventory management, and safety compliance while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Material Handling Warehouse Operations Forklift Operation Inventory Management Safety Compliance Loading and Unloading

Typical employer expectations

  • Apply role-specific judgment in material handling
  • Keep warehouse operations organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on forklift operation tasks
  • Maintain safe, dependable follow-through while supporting inventory management

Employers also commonly look for

  • Education: Some employers may expect some secondary school preparation.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a residential, commercial installer, and servicer, you will work on customer or client service, maintenance, hvac installation, plumbing, and plumbing services while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Customer Service Maintenance Hvac Installation Plumbing Plumbing Services Installation

Typical employer expectations

  • Apply role-specific judgment in customer or client service
  • Keep maintenance organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on hvac installation tasks
  • Maintain safe, dependable follow-through while supporting plumbing

Employers also commonly look for

  • Education: Employers may accept secondary school combined with job-related training or a relevant support program.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.
  • Licence or certification: Role-specific licensing, registration, certification, or a driver’s licence may be needed in some settings.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

As a supervisor, supply chain, tracking, and scheduling co-ordination occupation, you will work on logistics coordination, production planning, safety compliance, scheduling coordination, and supply chain management while keeping tasks organized, following employer procedures, and coordinating with the team as needed.

Role signals
Logistics Coordination Production Planning Safety Compliance Scheduling Coordination Supply Chain Management Team Supervision

Typical employer expectations

  • Apply role-specific judgment in logistics coordination
  • Keep production planning organized, accurate, and aligned with employer procedures
  • Coordinate clearly with supervisors, coworkers, or clients on safety compliance tasks
  • Maintain safe, dependable follow-through while supporting scheduling coordination

Employers also commonly look for

  • Education: Some employers may expect some secondary school preparation.
  • Experience: Relevant hands-on experience or supervised practical training is commonly expected.

Official reference

This is an independent editorial summary and category set based on role context and visible LMIA patterns. It is not an official Government of Canada NOC description.

See the Government of Canada NOC profile

Salaries are shown in CAD and reflect national hourly wage estimates. Employers may refine expectations, language needs, or licensing requirements during screening.

Create a profile for this role

LMIA Pathway Insight

Read the employer record like a candidate strategist

These LMIA pathway signals are based on A&H Stone Ltd's visible role mix, latest activity in October to December 2025, and the occupations that stand out most on this employer record: Bricklayers, Machining tool operators, Machinists and machining and tooling inspectors.

Confidence signal

LMIA validity confidence

Emerging confidence
Based on 1 approved positions in the latest visible period and the activity in October to December 2025, this employer reflects a Emerging level of international talent hiring activity in Canada.

Employer continuity

Employer consistency insight

Active in 2025
This employer has appeared in LMIA records across 5 different years, showing a steady long-term hiring presence.

Occupation mix

Occupation diversity insight

Bricklayers, Machining tool operators, Machinists and machining and tooling inspectors
The employer has hired under 6 distinct occupations over time, suggesting a broad workforce composition.

Demand pattern

Retention and continuity insight

Fairly Positive
LMIA records indicate employer hiring activity, which may reflect project-based, seasonal, or evolving workforce demand across hiring cycles.

Work-to-PR alignment

Pathway alignment for candidates

Emerging PR Pathway Fit
This employer’s hiring history and pathway signals reflect a Emerging PR Pathway Fit level of alignment with work-to-PR opportunities commonly linked to employer-supported immigration streams in Canada.
BC PNP Skilled Worker

Final takeaway

How to read this employer page

Visible demand in British Columbia
A&H Stone Ltd shows emerging LMIA hiring confidence based on the published employer record. The latest visible activity appears in October to December 2025. Visible sponsoring history includes roles such as Bricklayers, Machining tool operators, Machinists and machining and tooling inspectors. The current record set points to demand in British Columbia. Candidates who align their experience, NOC fit, and resume presentation to this employer profile can build a stronger application path.

Employer footprint

Visible hiring footprint and timeline

A&H Stone Ltd shows visible activity across 1 provinces and 3 streams. Use this footprint to judge where and how the employer's LMIA-supported hiring has been concentrated.

Visible LMIA activity timeline

Latest visible activity appears in October to December 2025. The timeline below groups approved positions by visible year and quarter so you can see how this employer record is distributed over time.

2025 October to December
1 approved positions
2024 October to December
1 approved positions
2021 April to June
2 approved positions
2020 January to March
1 approved positions
2016 October to December
1 approved positions

Provinces with visible records

British Columbia

Streams represented

High Wage Low Wage Unclassified

Related employer records

A&H Stone Ltd - Richmond, V6V1K9 A & H STONE LTD. - Richmond, BC V6V 3A5

Searcher questions

Questions candidates usually want answered on an employer page

These answers use A&H Stone Ltd's visible role mix, location footprint, and LMIA history so candidates can decide faster whether this employer is worth targeting.

Has A&H Stone Ltd hired foreign workers before?

A&H Stone Ltd shows a visible LMIA-related employer record with 6 approved positions on record. The latest visible activity appears in October to December 2025.

Which roles stand out most on this employer page?

The strongest visible role signals are Bricklayers, Machining tool operators, Machinists and machining and tooling inspectors. These are usually the best starting points when deciding whether your current job title and experience fit this employer.

Where is this employer's visible activity concentrated?

A&H Stone Ltd shows visible demand in British Columbia. Stream coverage currently points to High Wage, Low Wage, Unclassified.

How should I use this page before creating a profile?

Start by checking whether your experience aligns to Bricklayers, Machining tool operators, then review the sponsoring roles and recent timeline. If the fit looks strong, create a profile so your job title and resume can be matched to employers with similar visible demand.

Is this page useful for PR or work permit planning?

This employer’s hiring history and pathway signals reflect a Emerging PR Pathway Fit level of alignment with work-to-PR opportunities commonly linked to employer-supported immigration streams in Canada. Use this page as employer and role research, not as a guarantee of PR or a live job offer.

Market context

Employers like this have hired international talent across related roles

These related-role counts show how A&H Stone Ltd compares with broader visible LMIA demand in occupations connected to Bricklayers, Machining tool operators.

Machining tool operators

73+ Canadian employers have filed visible LMIA demand.

129 total approved positions are represented in related records.

Residential and commercial installers and servicers

751+ Canadian employers have filed visible LMIA demand.

1,589 total approved positions are represented in related records.

Bricklayers

271+ Canadian employers have filed visible LMIA demand.

1,176 total approved positions are represented in related records.

Material handlers

886+ Canadian employers have filed visible LMIA demand.

3,759 total approved positions are represented in related records.

Supervisors, supply chain, tracking and scheduling co-ordination occupations

1,970+ Canadian employers have filed visible LMIA demand.

2,825 total approved positions are represented in related records.

Machinists and machining and tooling inspectors

973+ Canadian employers have filed visible LMIA demand.

4,540 total approved positions are represented in related records.

Candidate roadmap

How to move from employer research to a profile employers can actually review

Comparable employers in public LMIA reference data have recruited international talent for positions like these. A completed LMIA-Ready Resume can improve your visibility for future openings.
  1. Enter your current job title so the platform can map the strongest LMIA-aligned occupations.
  2. Build your profile in about 60 seconds and publish a Canada-ready presentation employers can review.
  3. Use your LMIA-ready resume and cover letter to stay visible when verified employers reopen matching intake.

Create a Profile for Employers Like This

High value: 45 days of visibility plus a Canada-standard AI cover letter tailored to your profile.

Candidate readiness for LMIA employers in Canada

Employer Hiring Support

Recruitment services for Canadian employers handled through VisaTalents Global Recruiting Inc — in accordance with applicable Canadian employment standards.

Why VisaTalents works

  • Dedicated LMIA intelligence platform connected to verified employers.
  • Compliance-focused workflows built around Canadian recruitment requirements.
  • AI-assisted role mapping to improve NOC and TEER alignment before employers review the profile.

Contains information licensed under the Open Government Licence - Canada. VisaTalents adds its own data intelligence and may incorporate data collected from multiple information providers where applicable. Data accuracy, current openings, and employer requirements may vary.

Cookie Notice

We use cookies and similar technologies to operate the site, remember preferences, improve performance, and measure traffic. Review our Privacy Policy.